ISSN (online): 1996-1073
Call of the Journal:
- A Holistic Overview of the Energy Sector | From Engineering Approaches to Innovative ML Solutions
- Active Power Filters and Power Quality
- Advanced Electric Vehicle Techniques
- Advanced Environmental Controls for High-Performance Buildings and Sustainability
- Advanced Solutions to Increase Resilience of Medium Voltage Distribution Networks
- Advanced Techniques to Increase Energy Efficiency by Optimization and Improving Power Quality
- Advances in Catalytic Technologies for Biodiesel Fuel Synthesis
- Advances in Fluid Power Systems
- Advances in Materials, Technologies and Controls for Sustainable Buildings
- Advances in Modelling for Nuclear Science and Engineering
- Big Data on Energy, Climate Change and Sustainability
- Building Sustainable Cities of the Future
- Community Microgrids
- Computational Modelling of Wave Energy Converters
- Condensation Heat Transfer
- Control of Wind Turbines
- COVID-19 Pandemics | Energy, Economic, Environmental, Social, Policy and Health Impacts
- Decarbonising Heating and Cooling
- Design and Application of Electrical Machines
- Design and Application of Innovation Catalysts for Hydrogenation
- Drilling Technologies for the Next Generations
- Dynamic Modelling and Control in Multilevel Converters
- Economic and Policy Challenges of the Energy Transition in CEE Countries
- Economic Growth and Environmental Degradation in the Paradigm of Energy Transition
- Electric Power Transmission | Active Subtransmission Networks
- Electric Vehicle Charging Networks
- Electrified Powertrains for a Sustainable Mobility | Topologies, Design and Integrated Energy Management Strategies
- Electrothermal Modeling of Solar Cells and Modules
- Embedded Discrete Fracture Model (EDFM) for Advanced Naturally and Hydraulically Fractured Reservoir Simulation
- Emerging Materials and Fabrication Methods for Solid Oxide Fuel Cells (SOFCs)
- Emerging Technologies for the Efficient Utilization of Coal and Biomass
- Energy and Environmental Sustainability 2020
- Energy Conversion and Operation Technologies for Smart Grid
- Energy Data Visualization
- Energy Flows and Synergies between Energy Networks
- Energy Management in the Multi-Source Systems
- Energy Transition and Social Innovation
- Environmental and Sustainable Built Environments
- Estimation of the State-of-Charge and State-of-Health of Lithium-Ion Batteries
- European Energy Policy at a Crossroads
- Future Electrical Machines
- Governance Strategies and Insights to Accelerate the Production and Diffusion of Hydrogen and Fuel-Cell Technologies
- Green Building Technologies 2020
- Heat and Mass Transfer in Multi-Phase Flows
- Heating, Cooling, and Ventilation Systems | Applications and Performance
- Improving Energy Efficiency through Data-Driven Modeling, Simulation and Optimization
- Integration of Electrical Vehicles and Renewable Energy Resources into Power Distribution Networks
- Interactive Integration of Electric Vehicles and Power Networks | Emerging Issues and Solutions
- Life Cycle Assessment of Environmental System
- Lifetime Extension of Wind Turbines and Wind Farms
- Machine-Learning Methods for Complex Flows
- Mechanical Industrial Plants for Solid Waste Treatment
- Modeling and Control of Hybrid Electric Vehicles
- Modelling of Multiphase Flows for Renewable Energy
- Multilevel Power Converters Control and Modulation Techniques
- Nanotechnology for Solar Energy Conversion
- Next Generation of Dye-Sensitized Solar Cells
- Novel Developments in Energy Resources Management, Distribution Systems, Microgrids and Energy Communities
- Numerical Simulation of Wind Turbine
- Optimal Design of Power Converters
- Optimization of Propulsion in Transport Means
- Organic Photovoltaics and Organic Transistors
- Performance and Reliability of Wide Bandgap Semiconductor and Nano Device-Based Circuits for Energy Systems
- Perovskite Solar Cells
- Photovoltaic Devices
- Protection and Communication Techniques in Modern Power Systems
- Protection of Future Multi-Terminal HVDC Grids
- Proton-Exchange Membrane Fuel Cells
- Real-Time Monitoring and Control for Wind Turbine Systems
- Recent Progress in Metal-Organic Frameworks for Energy-Related Applications
- Recent Studies in District Heating and Cooling Systems
- Research on Wireless Power Transfer System
- Sector Coupling for Sustainable Urban and Regional Energy Systems
- Selected Papers from the “20th CIRIAF National Congress | Sustainable Development and Preservation of Environment and Human Health”
- Smart Built Environment for Health and Comfort with Energy Efficiency
- Smart Technologies, Management and Control for Energy Systems and Networks
- Smart Thermostats for Energy Saving in Buildings
- Storages and Power Plant Flexibility for Improving Renewable Energy Penetration
- Systemic Issues to Wind and Solar Energy Deployment
- Technologies Conducive to Low Green House Gas Emission
- Thermal Management and Experimental Techniques for a Sustainable Mobility
- Thermal Storage Technologies
- Waste-to-Energy Technology Integrated with Carbon Capture
Jul
2021
Aug
2021
Embedded discrete fracture models (EDFM) have been recently developed and widely proven to be the best fracture modeling tool for simulating any and all types of fractures (hydraulic and natural) to enhance reservoir models to drastically improve predictability and optimization/development strategies for both primary and enhanced oil recovery applications. Having this capability is critical because fractures can dominate the results seen in the field. This system can be swiftly integrated into existing frameworks for all fractured reservoirs to perform more predictive sensitivity analyses, more representative history matching, and accurate production forecasting. This Special Issue solicits original and high-quality research articles related to the EDFM developments and its applications in naturally and hydraulically fractured reservoirs. Of interest are original papers on: Advanced EDFM developments for fractured reservoir simulation; Comparison between EDFM and dual porosity dual permeability (DPDK); Integration of EDFM and artificial intelligence (AI) for fractured reservoirs; Advanced history matching and production forecasting using EDFM; Effects of natural fractures on well performance using EDFM; Coupling fracture model and reservoir model using EDFM; Advanced geomechanics simulation for fractured reservoirs using EDFM; Applications of EDFM in natural fracture calibration; Applications of EDFM in hydraulic fracture calibration; Applications of EDFM in well spacing optimization; Applications of EDFM in water intrusion with complex natural fractures; Applications of EDFM in well interference due to complex fracture hits; Applications of EDFM in well test of naturally fractured reservoirs; Applications of EDFM in rate or pressure transient analysis of fractured reservoirs; Applications of EDFM in enhanced gas and oil recovery with complex fractures; Applications of EDFM in geothermal with complex fracture networks; Applications of EDFM in complex fault modeling; Applications of EDFM in CO2 sequestration with complex fracture networks.
Keywords: Complex natural fractures; Complex hydraulic fractures; Advanced history matching; Improved production forecasting; Complex fracture hits; Embedded discrete fracture model; Artificial intelligence for complex fractures; Well spacing optimization; Well interference; Geomechanics; Enhanced oil recovery; Geothermal; CO2 sequestration.
Embedded Discrete Fracture Model (EDFM) for Advanced Naturally and Hydraulically Fractured Reservoir Simulation
Embedded discrete fracture models (EDFM) have been recently developed and widely proven to be the best fracture modeling tool for simulating any and all types of fractures (hydraulic and natural) to enhance reservoir models to drastically improve predictability and optimization/development strategies for both primary and enhanced oil recovery applications. Having this capability is critical because fractures can dominate the results seen in the field. This system can be swiftly integrated into existing frameworks for all fractured reservoirs to perform more predictive sensitivity analyses, more representative history matching, and accurate production forecasting. This Special Issue solicits original and high-quality research articles related to the EDFM developments and its applications in naturally and hydraulically fractured reservoirs. Of interest are original papers on: Advanced EDFM developments for fractured reservoir simulation; Comparison between EDFM and dual porosity dual permeability (DPDK); Integration of EDFM and artificial intelligence (AI) for fractured reservoirs; Advanced history matching and production forecasting using EDFM; Effects of natural fractures on well performance using EDFM; Coupling fracture model and reservoir model using EDFM; Advanced geomechanics simulation for fractured reservoirs using EDFM; Applications of EDFM in natural fracture calibration; Applications of EDFM in hydraulic fracture calibration; Applications of EDFM in well spacing optimization; Applications of EDFM in water intrusion with complex natural fractures; Applications of EDFM in well interference due to complex fracture hits; Applications of EDFM in well test of naturally fractured reservoirs; Applications of EDFM in rate or pressure transient analysis of fractured reservoirs; Applications of EDFM in enhanced gas and oil recovery with complex fractures; Applications of EDFM in geothermal with complex fracture networks; Applications of EDFM in complex fault modeling; Applications of EDFM in CO2 sequestration with complex fracture networks.
Keywords: Complex natural fractures; Complex hydraulic fractures; Advanced history matching; Improved production forecasting; Complex fracture hits; Embedded discrete fracture model; Artificial intelligence for complex fractures; Well spacing optimization; Well interference; Geomechanics; Enhanced oil recovery; Geothermal; CO2 sequestration.
AGORA (FAO), AGRIS (FAO), CAB Abstracts (CABI), Chemical Abstracts (ACS), Current Contents – Engineering, Computing & Technology (Clarivate Analytics), DOAJ, EconPapers (RePEc), Ei Compendex / Engineering Village (Elsevier), ETDE (IEA), Genamics JournalSeek, HINARI (WHO), IDEAS (RePEc), Inspec (IET), Journal Citation Reports / Science Edition (Clarivate Analytics), Julkaisufoorumi Publication Forum (Federation of Finnish Learned Societies), LAPSE, Norwegian Register for Scientific Journals, Series and Publishers (NSD), RePEc, Science Citation Index Expanded – Web of Science (Clarivate Analytics), Scopus (Elsevier), Web of Science (Clarivate Analytics), CLOCKSS (Digital Archive), e-Helvetica (Swiss National Library Digital Archive), Academic OneFile (Gale/Cengage Learning), EBSCOhost (EBSCO Publishing), Energy & Power Source (EBSCO), Engineering Source (EBSCO), Google Scholar, J-Gate (Informatics India), Materials Science & Engineering (ProQuest), ProQuest Central (ProQuest), Science In Context (Gale/Cengage Learning), WorldCat (OCLC).
Info at: www.mdpi.com/journal/energies/apc
Guest Editors
Prof. Dr. Kamy Sepehrnoori
Dr. Wei Yu
Prof. Dr. Kan Wu