Total Page Visits: 31
we

ISSN (online): 1996-1073
Journal Sheet: Energies

Call of the Journal:


×
- 5G Wireless Systems for Industry 4.0

- A Holistic Overview of the Energy Sector | From Engineering Approaches to Innovative ML Solutions

- Active Power Filters and Power Quality

- Advanced Electric Vehicle Techniques

- Advanced Environmental Controls for High-Performance Buildings and Sustainability

- Advanced Solutions to Increase Resilience of Medium Voltage Distribution Networks

- Advanced Techniques to Increase Energy Efficiency by Optimization and Improving Power Quality

- Advances in Catalytic Technologies for Biodiesel Fuel Synthesis

- Advances in Fluid Power Systems

- Advances in Materials, Technologies and Controls for Sustainable Buildings

- Advances in Modelling for Nuclear Science and Engineering

- Big Data on Energy, Climate Change and Sustainability

- Building Sustainable Cities of the Future

- Community Microgrids

- Computational Modelling of Wave Energy Converters

- Condensation Heat Transfer

- Control of Wind Turbines

- COVID-19 Pandemics | Energy, Economic, Environmental, Social, Policy and Health Impacts

- Decarbonising Heating and Cooling

- Design and Application of Electrical Machines

- Design and Application of Innovation Catalysts for Hydrogenation

- Drilling Technologies for the Next Generations

- Dynamic Modelling and Control in Multilevel Converters

- Economic and Policy Challenges of the Energy Transition in CEE Countries

- Economic Growth and Environmental Degradation in the Paradigm of Energy Transition

- Electric Power Transmission | Active Subtransmission Networks

- Electric Vehicle Charging Networks

- Electrified Powertrains for a Sustainable Mobility | Topologies, Design and Integrated Energy Management Strategies

- Electrothermal Modeling of Solar Cells and Modules

- Embedded Discrete Fracture Model (EDFM) for Advanced Naturally and Hydraulically Fractured Reservoir Simulation

- Emerging Materials and Fabrication Methods for Solid Oxide Fuel Cells (SOFCs)

- Emerging Technologies for the Efficient Utilization of Coal and Biomass

- Energy and Environmental Sustainability 2020

- Energy Conversion and Operation Technologies for Smart Grid

- Energy Data Visualization

- Energy Flows and Synergies between Energy Networks

- Energy Management in the Multi-Source Systems

- Energy Transition and Social Innovation

- Environmental and Sustainable Built Environments

- Estimation of the State-of-Charge and State-of-Health of Lithium-Ion Batteries

- European Energy Policy at a Crossroads

- Future Electrical Machines

- Governance Strategies and Insights to Accelerate the Production and Diffusion of Hydrogen and Fuel-Cell Technologies

- Green Building Technologies 2020

- Heat and Mass Transfer in Multi-Phase Flows

- Heating, Cooling, and Ventilation Systems | Applications and Performance

- Improving Energy Efficiency through Data-Driven Modeling, Simulation and Optimization

- Integration of Electrical Vehicles and Renewable Energy Resources into Power Distribution Networks

- Interactive Integration of Electric Vehicles and Power Networks | Emerging Issues and Solutions

- Life Cycle Assessment of Environmental System

- Lifetime Extension of Wind Turbines and Wind Farms

- Machine-Learning Methods for Complex Flows

- Mechanical Industrial Plants for Solid Waste Treatment

- Modeling and Control of Hybrid Electric Vehicles

- Modelling of Multiphase Flows for Renewable Energy

- Multilevel Power Converters Control and Modulation Techniques

- Nanotechnology for Solar Energy Conversion

- Next Generation of Dye-Sensitized Solar Cells

- Novel Developments in Energy Resources Management, Distribution Systems, Microgrids and Energy Communities

- Numerical Simulation of Wind Turbine

- Optimal Design of Power Converters

- Optimization of Propulsion in Transport Means

- Organic Photovoltaics and Organic Transistors

- Performance and Reliability of Wide Bandgap Semiconductor and Nano Device-Based Circuits for Energy Systems

- Perovskite Solar Cells

- Photovoltaic Devices

- Protection and Communication Techniques in Modern Power Systems

- Protection of Future Multi-Terminal HVDC Grids

- Proton-Exchange Membrane Fuel Cells

- Real-Time Monitoring and Control for Wind Turbine Systems

- Recent Progress in Metal-Organic Frameworks for Energy-Related Applications

- Recent Studies in District Heating and Cooling Systems

- Research on Wireless Power Transfer System

- Sector Coupling for Sustainable Urban and Regional Energy Systems

- Selected Papers from the “20th CIRIAF National Congress | Sustainable Development and Preservation of Environment and Human Health”

- Smart Built Environment for Health and Comfort with Energy Efficiency

- Smart Technologies, Management and Control for Energy Systems and Networks

- Smart Thermostats for Energy Saving in Buildings

- Storages and Power Plant Flexibility for Improving Renewable Energy Penetration

- Systemic Issues to Wind and Solar Energy Deployment

- Technologies Conducive to Low Green House Gas Emission

- Thermal Management and Experimental Techniques for a Sustainable Mobility

- Thermal Storage Technologies

- Waste-to-Energy Technology Integrated with Carbon Capture

Year of the Pubblication: 2021
25
Aug
2021
Paper Submission Deadline
27
Sep
2021
Publishing Date

Add to Calendar 08/25/2021 08:00 Europe/Rome Design and Application of Electrical Machines

There is little need to prove the importance of the subject matter. Electrical machines are the most important components of both the industrial and the commercial world. They are at the heart of the new industrial revolution brought forth by the development of electromobility and renewable energy systems. Today’s electric motors must meet the most stringent requirements of reliability, availability, and high efficiency in order to match (and exceed!) the useful lifetime of power electronics in the complex system application and to compete in the market under ever-increasing pressure to deliver the highest performance criteria. Today, thanks to the application of highly efficient numerical algorithms running on high-performance computers, it is possible to design electric machines and entire drive systems faster and at a lower cost. At the same time, progress in the field of material science and technology enables the development of ever more complex motor designs and topologies. Therefore, the purpose of this Special Issue is to contribute to the development of electric machines. We encourage scientists and application engineers to present the results of their research in the field of design and application of electric machines from the smallest ones with powers up to several watts, to the largest at megawatt power. We are pleased to accept original research as well as review articles.vTopics of interest for publication include but are not limited to: Simulation tools, modeling, and analysis of electrical machines; New design methods of electrical machines; Optimization of electrical machines; Electrical machines for EVs and HEVs; Power electronics used for electrical machines; Supply and control of electrical machines; New technologies, materials, devices, and systems for electrical machines; Linear drives for transportation.
Keywords: electrical machines; numerical field calculations; optimization of electromagnetic fields; electrical vehicles; permanent magnet machines; hybrid excited machines; wind power energy.

Switzerland
CALL FOR PAPERS
Code: CFP-E107-SI31_2021
Posting date: 07/11/2020

Design and Application of Electrical Machines


Aims and Scope

There is little need to prove the importance of the subject matter. Electrical machines are the most important components of both the industrial and the commercial world. They are at the heart of the new industrial revolution brought forth by the development of electromobility and renewable energy systems. Today’s electric motors must meet the most stringent requirements of reliability, availability, and high efficiency in order to match (and exceed!) the useful lifetime of power electronics in the complex system application and to compete in the market under ever-increasing pressure to deliver the highest performance criteria. Today, thanks to the application of highly efficient numerical algorithms running on high-performance computers, it is possible to design electric machines and entire drive systems faster and at a lower cost. At the same time, progress in the field of material science and technology enables the development of ever more complex motor designs and topologies. Therefore, the purpose of this Special Issue is to contribute to the development of electric machines. We encourage scientists and application engineers to present the results of their research in the field of design and application of electric machines from the smallest ones with powers up to several watts, to the largest at megawatt power. We are pleased to accept original research as well as review articles.vTopics of interest for publication include but are not limited to: Simulation tools, modeling, and analysis of electrical machines; New design methods of electrical machines; Optimization of electrical machines; Electrical machines for EVs and HEVs; Power electronics used for electrical machines; Supply and control of electrical machines; New technologies, materials, devices, and systems for electrical machines; Linear drives for transportation.
Keywords: electrical machines; numerical field calculations; optimization of electromagnetic fields; electrical vehicles; permanent magnet machines; hybrid excited machines; wind power energy.

Languages
English
Country
Switzerland
Topics
Advanced Materials, Artificial Materials, Bio-based Materials, Biomaterials, Chemical & Material Sciences, Clean Technologies, Complex Systems, Design, Design Methodology, Digital Technologies, Electrical Engineering, Enabling Technologies, Energy Efficiency, Environmental Technologies, Future Developments, Green Materials, Green Mobility, Industrial Design, Industrial Engineering, Industry 4.0, Innovative Materials, Innovative Technologies, Manufacturing & Machinery, Materials, Methodology, Mobility, Modeling, Nanomaterials, Natural Materials, Performance Evaluation, Process Modeling and Simulation, Product Design, Recycled Materials, Renewable Energy, Renewable Resources, Smart Devices, Smart Materials, Smart Systems, Sustainable Development, Sustainable Materials, Transports, Wind Energy, Wind Engineering
Review process
The Journal adopts double-blind peer review process
Indexed By

AGORA (FAO), AGRIS (FAO), CAB Abstracts (CABI), Chemical Abstracts (ACS), Current Contents – Engineering, Computing & Technology (Clarivate Analytics), DOAJ, EconPapers (RePEc), Ei Compendex / Engineering Village (Elsevier), ETDE (IEA), Genamics JournalSeek, HINARI (WHO), IDEAS (RePEc), Inspec (IET), Journal Citation Reports / Science Edition (Clarivate Analytics), Julkaisufoorumi Publication Forum (Federation of Finnish Learned Societies), LAPSE, Norwegian Register for Scientific Journals, Series and Publishers (NSD), RePEc, Science Citation Index Expanded – Web of Science (Clarivate Analytics), Scopus (Elsevier), Web of Science (Clarivate Analytics), CLOCKSS (Digital Archive), e-Helvetica (Swiss National Library Digital Archive), Academic OneFile (Gale/Cengage Learning), EBSCOhost (EBSCO Publishing), Energy & Power Source (EBSCO), Engineering Source (EBSCO), Google Scholar, J-Gate (Informatics India), Materials Science & Engineering (ProQuest), ProQuest Central (ProQuest), Science In Context (Gale/Cengage Learning), WorldCat (OCLC).

APC

Info at: www.mdpi.com/journal/energies/apc

Submit by website
Call webpage
Additional Notice from the Editor

Guest Editors
Prof. Dr. Ryszard Palka
Dr. Marcin Wardach