ISSN (online): 1996-1944
Journal Sheet: Materials

Call of the Journal:


×
- Additive Manufacturing Methods and Modeling Approaches

- Advanced Carbon Materials in Water Treatment or Separations Technology

- Advanced Functional Hybrid Materials for Novel Biomolecular Electronics

- Advances in Biomaterials | Design, Synthesis, Characterisation and Biomedical Application

- Advances in Construction and Building Materials

- Advances in Green Construction Materials

- Assessment of Metallurgical and Mechanical Properties of Welded Joints via Numerical Simulation and Experiments

- Carbon Compounds-Reinforced Ceramics

- Concrete and Waterproofing Materials | Development of Waterproofing Technology for Buildings and Civil Concrete Structures

- Corrosion Inhibitors for Steel | Experimental and Theoretical Studies

- Damage and Failure of Polymers, Polymer-Like Materials, Adhesives and Polymer Nanocomposites

- Development of Energy Storage or Conversion Element Based on Various Nano Materials

- Dyes | Synthesis, Properties, and Applications

- Dynamic Behavior of Ceramic Composites

- Flexible Sensors and Actuators for Novel Wearable Solutions

- Fundamentals and Applications of Bionano Sensor Techniques

- Graphene Foam Based Composites

- Growth and Application of Foam-Based Materials

- High Performance Concrete

- Hybrid Noble Metal/Graphene Aerogels | Synthesis, Characterization and Applications for Chemical Sensing and Biosensing

- Hydrogen Storage and Fuel Cells | Materials, Characterization and Applications

- Load Test and Numerical Analysis on Construction Materials

- Machining and Surface Properties of Steel Parts

- Materials under Extreme Conditions | Technologies for CRMs Reduction, Substitution and Recovery

- Microplastics and Nanoplastics | From Resource to Pollution

- Mineral-Bonded Composites for Enhanced Structural Impact Safety

- Modification and Processing of Biodegradable Polymers

- Nanostructured Semiconductors for Photoinduced Applications

- Novel Inorganic Adsorbents for Environmental Purification

- Numerical Simulation and Experimental Studies of Wave Phenomena in Composite Materials

- Performance Research of Polyurethane Foams and Composites

- Physics, Electrical and Structural Properties of Dielectric Layers

- Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels

- Processing and Thermal Properties of Hybrid Composites

- Recent Advances in 3D Printing for Biomaterials

- Recent Progress in the Development, Material Properties, and Post-Processing of Additively Manufactured Components

- Silica and Silica-based Materials for Biotechnology, Polymer Composites and Environmental Protection

- Study on the Modification and Compressive Properties of Concrete Buildings Materials

- Superconductors for Opto-Nano and Micro-Electro-Mechanical Systems (O-N/MEMS)

- Synthesis and Characterization of Hybrid Nanomaterials and Nanocomposites

- Synthesis, Properties and Applications of Polymer Blends

- Testing of Materials and Elements in Civil Engineering

- The Science and Technology of 3D Printing

Year of the Pubblication: 2021
31
Jan
2021
Paper Submission Deadline
28
Feb
2021
Publishing Date

Add to Calendar 01/31/2021 08:00 Europe/Rome Superconductors for Opto-Nano and Micro-Electro-Mechanical Systems (O-N/MEMS)

Since the discovery of metallic superconductors (low temperature) by H. Kamerlingh-Onnes in 1911 and ceramic superconductors (high temperature) by researchers J. Georg Bednorz and K. Alex Mueller at an IBM laboratory in Switzerland in 1987, there have been tremendous efforts put in understanding how superconductivity occurs, such as the Ginzburg-Landau and BSC theories and Little-Parks effect. An incredible amount of work has also been done on the implementation of low and high temperature superconductors: SQUID magnetometers, micro/nano electronics, superconducting electromagnets used to build maglev trains, magnetic resonance imaging (MRI) and nuclear magnetic resonance devices, particle accelerators in nuclear reactors, RF and microwave filters, fault current limiters, transition edge sensors, the superconducting bolometers, the superconducting tunnel junction detectors, the kinetic inductance detector, and superconducting nanowire single-photon detectors, to name but a few. The purpose of the Special Issue on Superconductors for Opto-Nano and Micro-Electromechanical Systems (N/MEMS) is to reveal current efforts on the implementation and of superconductivity and superconducting materials in nano and micro-electromechanical devices such as sensors, actuators and harvesters, sensors, and switches for quantum computing circuits, and their integration to such as CMOS, N/MEMS, and microfluidics platforms and their properties testing/metrology and structural characterization, i.e., pinning density, crystalline phase distribution, etc.
Keywords: pinning density; green phase; thermodynamics; SQUIDs; SQIFs; superconducting O-N/MEMS sensors and actuators; quantum computers; superconducting switches and transistors; testing/integration/packaging.

Switzerland
CALL FOR PAPERS
Code: CFP-M110-SI41_2021
Posting date: 06/11/2020

Superconductors for Opto-Nano and Micro-Electro-Mechanical Systems (O-N/MEMS)


Aims and Scope

Since the discovery of metallic superconductors (low temperature) by H. Kamerlingh-Onnes in 1911 and ceramic superconductors (high temperature) by researchers J. Georg Bednorz and K. Alex Mueller at an IBM laboratory in Switzerland in 1987, there have been tremendous efforts put in understanding how superconductivity occurs, such as the Ginzburg-Landau and BSC theories and Little-Parks effect. An incredible amount of work has also been done on the implementation of low and high temperature superconductors: SQUID magnetometers, micro/nano electronics, superconducting electromagnets used to build maglev trains, magnetic resonance imaging (MRI) and nuclear magnetic resonance devices, particle accelerators in nuclear reactors, RF and microwave filters, fault current limiters, transition edge sensors, the superconducting bolometers, the superconducting tunnel junction detectors, the kinetic inductance detector, and superconducting nanowire single-photon detectors, to name but a few. The purpose of the Special Issue on Superconductors for Opto-Nano and Micro-Electromechanical Systems (N/MEMS) is to reveal current efforts on the implementation and of superconductivity and superconducting materials in nano and micro-electromechanical devices such as sensors, actuators and harvesters, sensors, and switches for quantum computing circuits, and their integration to such as CMOS, N/MEMS, and microfluidics platforms and their properties testing/metrology and structural characterization, i.e., pinning density, crystalline phase distribution, etc.
Keywords: pinning density; green phase; thermodynamics; SQUIDs; SQIFs; superconducting O-N/MEMS sensors and actuators; quantum computers; superconducting switches and transistors; testing/integration/packaging.

Languages
English
Country
Switzerland
Topics
Dynamic Models, Electrical Engineering, Sensors, Testing
Review process
The Journal adopts double-blind peer review process
Indexed By

ADS-Astrophysics Data System, AGORA(FAO), CAB Abstracts(CABI), Chemical Abstracts (ACS), Current Contents-Engineering, Computing & Technology (Clarivate Analytics), DOAJ, Ei Compendex/Engineering Village (Elsevier), Genamics JournalSeek, Global Health (CABI), HINARI (WHO), Inspec (IET), Journal Citation Reports/Science Edition (Clarivate Analytics), Julkaisufoorumi Publication Forum (Federation of Finnish Learned Societies), Norwegian Register for Scientific Journals, Series and Publishers (NSD), Polymer Library (Smithers Rapra), PubMed (NLM), Science Citation Index Expanded – Web of Science (Clarivate Analytics), Scopus (Elsevier), Web of Science (Clarivate Analytics), Zetoc (British Library), CLOCKSS (Digital Archive), e-Helvetica (Swiss National Library Digital Archive), PubMed Central (NLM), Academic OneFile (Gale/Cengage Learning), EBSCOhost (EBSCO Publishing), Energy & Power Source (EBSCO), Engineering Source (EBSCO), Google Scholar, J-Gate (Informatics India), Materials Science & Engineering (ProQuest).

APC

Info at: www.mdpi.com/journal/materials/apc

Submit by website
Call webpage
Additional Notice from the Editor

Guest Editor
Prof. Dr. Mustafa Yavuz